My tamiya 4 wheel drive mini cars

Here are my currently collected Tamiya 4 wheel drive mini cars, consisting of TMAC, Prostock and Speedtech racing category, I have collected these cars started from my interest back in January 2020, I was fond of this toys back in the 90's when I was young but I wasn't able to purchase any, see below my fleets of different category racing and non-racing Tamiya 4WD mini cars
 
 

 
TMAC
Kit : Rowdy Bull Starter
Chassis : FMA
Wheel : Medium
Tires : Super hard
Front Bumper : FRP Wide
Rear Bumper : Rear Stay Wide
Front roller : 13mm with Stabilizers
Rear roller : 14mm
Weight : 93 Grams
Dampers : Side
Others: Break set
 
tmac1
 
Kit : Rowdy Bull Starter
Chassis : FMA
Wheel : Medium
Tires : Super hard
Front Bumper : FRP Wide
Rear Bumper : Rear Stay Wide
Front roller : 13mm high stabilizers
Rear roller : 14mm
Weight : 92 Grams
Dampers : Side
Others: Break set
 
 tmac2
 
Kit : Rowdy Bull Starter
Chassis : FMA
Wheel : Medium
Tires : Super hard
Front Bumper : FRP Wide
Rear Bumper : Rear Stay Wide
Front roller : 13mm with stabilizers
Rear roller : 14mm
Weight : 94 Grams
Dampers : Side
Others: Break set
Podium: 1st Place (Aug 28 2020) with atomic motor and 3.5 gear
 
Kit : Rowdy Bull, Light Poly cowl
Chassis : FMA
Wheel : Medium
Tires : Super hard slick and Hard front
Front Bumper : FRP
Rear Bumper : Rear Stay Wide
Front roller : 13mm Dpr
Rear roller : 13mm
Weight : 86 Grams
Dampers : Side and Rear
Others: Break set
Podium: 2nd Place (Aug 28 2020) with atomic motor and 3.5 gear
 
Kit : Rowdy Bull Blue
Chassis : FMA
Wheel : Medium
Tires : Super hard
Front Bumper : none
Rear Bumper : Rear Stay Wide
Front roller : 13mm Dpr
Rear roller : 13mm
Weight : 88 Grams
Dampers : Rear
Others: Popcicle plate break
 tmac5
 

 
PRostock 
 
Kit : Black saber spacial
Chassis : S2
Wheel : Medium
Tires : Super hard Red
Front Bumper :
Rear Bumper :
Front roller : 13mm Dpr
Rear roller : 13mm
Weight : 60 Grams
Dampers :
Others:
 
ps1
 
Kit : Dyna hawk
Chassis : SXX
Wheel : Medium
Tires : Super hard
Front Bumper :
Rear Bumper :
Front roller : 13mm Dpr
Rear roller : none
Weight : 55 Grams
Dampers :
Others: 19mm Side rollers, no Tail
 ps2
 
Kit : Sunny Shuttle
Chassis : AR
Wheel : Medium
Tires : Super hard
Front Bumper :
Rear Bumper :
Front roller : 13mm Dpr
Rear roller : 13 mm
Weight : 89 Grams
Dampers :
Others:
 ps3
 
Kit : Jolly Joker
Chassis : AR
Wheel : Medium
Tires : Super hard
Front Bumper :
Rear Bumper :
Front roller : 13mm Dpr
Rear roller : 13 mm
Weight : 87 Grams
Dampers :
Others:
 ps4
 
Kit : Dyipney, white chassis (replaced)
Chassis : FMA
Wheel : Medium
Tires : Hard and Superhard slick rear
Front Bumper :
Rear Bumper :
Front roller : 13mm Dpr
Rear roller : 13 mm
Weight : 85 Grams
Dampers :
Others:
 ps5
 
Kit : Dyipney
Chassis : FMA
Wheel : Medium
Tires : Superhard
Front Bumper :
Rear Bumper :
Front roller : 13mm Dpr
Rear roller : 13 mm
Weight : 86 Grams
Dampers :
Others:
 ps6
 
Kit : DCR01
Chassis : MA
Wheel : Medium
Tires : Superhard
Front Bumper :
Rear Bumper :
Front roller : 13mm Dpr
Rear roller : 13 mm with Oring
Weight : 67 Grams
Dampers :
Others:
 ps7
 
Kit : DCR01
Chassis : MA
Wheel : Medium
Tires : Superhard
Front Bumper :
Rear Bumper :
Front roller : 13mm Dpr
Rear roller : 13 mm with Oring
Weight : 67 Grams
Dampers :
Others:
 ps8
 
Kit : DCR01
Chassis : MA
Wheel : Medium
Tires : Superhard
Front Bumper :
Rear Bumper :
Front roller : 13mm Dpr
Rear roller : 13 mm with Oring
Weight : 66 Grams
Dampers :
Others:
 ps9
 
Kit : Aero Avante
Chassis : AR
Wheel : Medium
Tires : Superhard
Front Bumper :
Rear Bumper :
Front roller : 13mm Dpr
Rear roller : 13 mm with Oring
Weight : 61 Grams
Dampers :
Others: no rear wing
 PS10
 
Kit : Photo saber
Chassis : AR
Wheel : Medium
Tires : Superhard
Front Bumper :
Rear Bumper :
Front roller : 13mm Dpr
Rear roller : 13 mm with Oring
Weight : 64 Grams
Dampers :
Others: no rear wing
 ps11
 
Kit : Beak stinger
Chassis : AR
Wheel : Medium
Tires : Superhard
Front Bumper :
Rear Bumper :
Front roller : 13mm Dpr
Rear roller : 13 mm with Oring
Weight : 65 Grams
Dampers :
Others: no rear wing
 
 ps12
 
Kit : Brocken Gigant
Chassis : FMA
Wheel : Medium
Tires : Superhard
Front Bumper :
Rear Bumper :
Front roller : 13mm Dpr
Rear roller : 13 mm
Weight : 71 Grams
Dampers :
Others: Cowl 16mm roller with Oring
 ps13
 
Kit : Hyundai i20 coupe WRC
Chassis : MA smoked
Wheel : Medium
Tires : Hard
Front Bumper :
Rear Bumper :
Front roller :
Rear roller :
Weight :
Dampers :
Others : 
Status : incomplete
 ps14
 
Kit : Hexagonite
Chassis : MA
Wheel :
Tires :
Front Bumper :
Rear Bumper :
Front roller :
Rear roller :
Weight :
Dampers :
Others : 
Status : incomplete
 
 ps15
 
Kit : Shadow shark Italia special
Chassis : AR
Wheel : Large
Tires : Hard
Front Bumper :
Rear Bumper :
Front roller : 13mm
Rear roller : 13mm
Weight :
Dampers :
Others : 
Status : Boxed
 
 ps16

 
Speedtech
 
Kit : Custom MS
Chassis : MS Custom Flex front and rear
Wheel : Medium
Tires : Trimmed slick clear
Front Bumper : FRP
Rear Bumper : FRP
Front roller : 19 mm (can put oring)
Rear roller : 13 mm Dar with stabilizers
Weight : 107 grams
Dampers : Side and Rear
Others : front 2mm and rear 1.5mm  breaks
 
st1
 
Kit : Custom MS
Chassis : MS Custom Flex rear only
Wheel : Medium Alum
Tires : Trimmed
Front Bumper : FRP
Rear Bumper : FRP
Front roller : 19 mm (can put oring)
Rear roller : 13 mm Dar with stabilizers
Weight : 106 grams
Dampers : Side and Rear
Others : front 1mm and rear 1mm  breaks
 
 st2
 
Kit : Custom MS
Chassis : MS lightened
Wheel : Medium Alum
Tires : Trimmed
Front Bumper : FRP
Rear Bumper : FRP
Front roller : 19 mm oringless
Rear roller : 13 mm Dar with stabilizers
Weight : 107 grams
Dampers : Side and Rear
Others : front 1.5mm and rear 1.5mm  breaks
 
 st3
 
Kit : Custom S2
Chassis : S2 reverse motor
Wheel : Medium TE37
Tires : Trimmed
Front Bumper : FRP with 3 point attachment
Rear Bumper : FRP wide
Front roller : 19 mm (can put oring)
Rear roller : 13 mm Dar with stabilizers
Weight : 90 grams
Dampers : Side and Rear
Others : front 2.5mm and rear 2mm  breaks
 
 st4
 
Kit : Custom FM
Chassis : FM reinforced
Wheel : Medium TE37
Tires : Trimmed
Front Bumper : FRP
Rear Bumper : FRP wide
Front roller : 19 mm (can put oring)
Rear roller : 13 mm Dar with stabilizers
Weight : 108 grams
Dampers : Side and Rear
Others : front 2mm and rear 2.5mm breaks
 
 st5
 
Kit : Custom FMA
Chassis : FMA lightened
Wheel : Medium slim wide
Tires : Trimmed
Front Bumper : FRP
Rear Bumper : FRP wide
Front roller : 19 mm (can put oring)
Rear roller : 13 mm Dar with stabilizers
Weight : 101 grams
Dampers : Side and Rear
Others : front 2mm and rear 2.5mm breaks
 
 st6
 
Kit : Custom FMA
Chassis : FMA lightened
Wheel : Medium TE37
Tires : Trimmed
Front Bumper : FRP
Rear Bumper : 3 point attachment w/ wide FRP
Front roller : 19 mm oringless
Rear roller : 13 mm Dar with stabilizers
Weight : 101 grams
Dampers : Side and Rear
Others : front 2mm and rear 1mm breaks
 
 st7
 
Kit : Custom FMA
Chassis : FMA lightened reverse motor
Wheel : Medium TE37
Tires : Trimmed
Front Bumper : FRP
Rear Bumper : FRP wide
Front roller : 19 mm (can put oring-above)
Rear roller : 13 mm Dar with stabilizers
Weight : 96 grams
Dampers : Side and Rear
Others : front 3mm and rear 2mm breaks
 
 st8
 
Kit : Custom VS
Chassis : VS
Wheel : Medium TE37
Tires : Trimmed
Front Bumper : FRP wide
Rear Bumper : 3 Point Attachment
Front roller : 19 mm (can put oring)
Rear roller : 13 mm Dar with stabilizers
Weight : 104 grams
Dampers : Side and Rear
Others : front 2.5mm and rear 3mm breaks
 
 st9
 
Kit : Custom S2
Chassis : S2
Wheel : Medium TE37
Tires : Trimmed
Front Bumper : FRP
Rear Bumper : FRP wide
Front roller : 19 mm (can put oring)
Rear roller : 13 mm Dar with stabilizers
Weight : 88 grams
Dampers : Side and Rear
Others : front 1mm and rear 3mm breaks
 
 st10
 
Kit : Custom S2
Chassis : S2
Wheel : Medium TE37
Tires : Trimmed
Front Bumper : FRP
Rear Bumper : FRP wide
Front roller : 19 mm (can put oring)
Rear roller : 13 mm Dar with stabilizers
Weight : 88 grams
Dampers : Side and Rear
Others : front 2mm and rear 2mm breaks
 
 st11
 
Kit : Custom FMA
Chassis : FMA Lightened
Wheel : Medium TE37
Tires : Trimmed
Front Bumper : FRP
Rear Bumper : FRP wide
Front roller : 19 mm oringless
Rear roller : 13 mm Dar with stabilizers
Weight :
Dampers : Side and Rear
Others : front 1mm and rear 3mm breaks
Podium: 2nd Place (Aug 14 2020) with ultra motor and 3.5 gear
 


Home MyBlog MyTamiya Sitemagic Gallery Contact Sitemap

 RICOTIVI "Thank you for checking the Ads"
 North Caloocan
Metro Manila Philippines
 Al Rabea District
Riyadh, Kingdom of Saudi Arabia
 Hakuna Matata
 
Copyright 2021 ricotivi.com - best viewed on desktop mode
   /Sunrise2/Facebook.png  Follow us on Twitter  My Youtube